• Bentley Bentayga 2024+ with 18pin cluster connector;

• Bentley Mulsanne 2024+ with 18pin cluster connector;

• Bentley New Continental GT  2024+ with 18pin cluster connector;

• Bentley Flying Spur 2024+ with 18pin cluster connector;

    
 

How to install:
Plug and Play device with easiest connection way possible, no soldering is required in the installation process. Remove instrument cluster - look video how to do this. Disconnect cluster grey connector and remove plastic cover from connector. Now put this cover on SPEEDSTOP female connector. SPEEDSTOP male connector connect to car cluster connector - check twice connectors orientation - on both connectors one side have trail - look picture. Use additional cable ties for fixing connectors.

Speedometer works correctly all time.

Using SPEEDSTOP on Bentley: (hazard indicator on speedometer blinks every time when working mode are changed­): 

•  MODE1: Push 3x Return button or 4x High Beam switch (hazard indicator on cluster blinks 1 time). To finish SPEEDSTOP enable procedure, switch ignition OFF, close car and wait ~2 minutes (untill car electronic switches OFF) = Odometer freezed, Speedometer shows actual speed; 
• MODE2: Push 3x Return button or 4x High Beam switch (hazard indicator on cluster blinks 2 time) = Odometer counts 10% of driven distance (10km counted after 100km), Speedometer shows actual speed;
• Normal MODE: Push 3x Return button or 4x High Beam switch (hazard indicator on cluster blinks 3 time) = back to normal mode, Odometer and Speedometer works as normal.

After Ignition OFF/ON SPEEDSTOP keeps selected working mode.

If you remove SPEEDSTOP adapter after test drive, odometer not changing.