AMILCAR		2012-12-12 16:20:50
ANY idea if new software S5.38 can use it in on desk.. or just in the car i mean.. like old software can do it in both.. AND ALSO THEY FORGOT TO SAY IT NEEDS INTERNET CONNECTION
Quote

Reply

2 pages <  1  [2]

Steve		2013-02-12 06:08:45
Quote: Hi,I was able to read the crash file (xc2361) when connected through obd2. Unable to read the files on the table with all the connectios done according to the web diagram. (always said connect error). Please advice. Thanks. Walter i have the exact same problem.
Quote

Steve		2013-02-12 06:16:01
i am unable to clear crash data via OBD2 . 2011 ford fusion the clear crash data button is gray . i can not press the button.
Quote

Steve		2013-02-12 06:19:02
here is a picture of the button grayed out
Quote

Steve		2013-02-12 20:19:17
Quote: Ford RCM has 2 connectors ,310A is the small one and 310B is the large one. Since Ford uses both high speed and medium speed CAN network, one has to connect both network together to make them communicate on bench. Picture shown on site has terminal #13 as power on 310a connector and terminal # 14 as the ground. High speed CAN + on terminal 9 and CAN- on terminal #10 on connector 310B. The extra wiring I added is as following: 1.attach another yellow wire to #19 (just below the existing yellow wire)for medium speed CAN+. 2.attach another green wire to #20(just bellow the existing green wire) for CAN -. The casing of the module is supposed to be the ground circuit.(since #10 of connector 310A is empty in the wiring diagram) Hopefully that will work for you! P.S.- I hope Support at Codecard do not mind I posted this info because it has not been verified yet. (I do apologize if they do) Walter i just try this on a 2011 ford fusion. did not work for me.
Quote

Steve		2013-02-20 01:14:57
those of you having trouble with the C1 adapter, you need to connect the 12v power to the red and black plugs.
Quote

Reply

2 pages <  1  [2]